Stick Welders
Houston, United StatesCompany
Hutco, Inc.
Location
Houston, TX
Job Type
Full-time
Posted
3 days ago
Via
Indeed
Job Description
HUTCO, INC.
Position: Welder
Job Location: Brady Island / Channelview, TX
Hutco Branch: Houston, TX
Rate of Pay: $20.00 per hour, depending on skills test results.
DESCRIPTION:
Currently seeking Welders to work in Houston, Texas. To be considered for this Welder opportunity, you must have at least 2 years of experience in stick welding.
REQUIREMENTS:
• Must be able to pass hands-on certification tests.
TOOLS ARE REQUIRED FOR TESTING:
•Welding Hood (connects to Hard hat)
• Welding Gloves
• Chipping Hammer
• Steel Toe Boots
• Long – Sleeve Shirt
• Long Pants
• Stinger/ Electrode Holder with Male Connector (SMAW)
• Pliers / Cutters (FCAW)
• Safety Glasses
• Wire Brush
ESSENTIAL JOB FUNCTIONS:
• Must have knowledge of equipment, work processes, and techniques used for this role including the ability to perform all functions of the position in conformity with applicable regulations and generally observed safety practices.
• Enter and move through manholes to reach and work in internally confined spaces.
• Manipulate and transport loads up to 50 pounds over distances of up to 200 feet approximately 1 to 6 times during each 8 hour shift, occasionally 75 pounds.
• Manipulate and operate all machines and tools essential to the performance of the position of Structural Welder.
• Traverse gangways and scaffolding at varying heights.
• Traverse and negotiate uneven surfaces and uneven heights between dock and vessel.
• Stooping, squatting, twisting, kneeling, lifting, and reaching.
BENEFITS:
A limited benefit plan is available to Hutco, Inc. employees through Essential Staff Care. Available plans include:
• Medical / Prescription
• Dental Coverage
• Vision Coverage
• Short Term Disability Benefits
• Term Life Benefits
• Accidental Death & Dismemberment Benefit
CONTACT HUTCO TODAY!
Apply Online:
www.hutcoinc.com
Office:
8306 Broadway
Houston, Tx. 77061
Send resumes to:
[email protected] George Cumpian 832-444-8125
[email protected] Aleckzander Borg 832-872-0838
Or call us at:
Office - (713) 640-1705
Se habla Español
Hutco, Inc. is an Equal Opportunity Employer (EOE).
#HUTCOSP
Position: Welder
Job Location: Brady Island / Channelview, TX
Hutco Branch: Houston, TX
Rate of Pay: $20.00 per hour, depending on skills test results.
DESCRIPTION:
Currently seeking Welders to work in Houston, Texas. To be considered for this Welder opportunity, you must have at least 2 years of experience in stick welding.
REQUIREMENTS:
• Must be able to pass hands-on certification tests.
TOOLS ARE REQUIRED FOR TESTING:
•Welding Hood (connects to Hard hat)
• Welding Gloves
• Chipping Hammer
• Steel Toe Boots
• Long – Sleeve Shirt
• Long Pants
• Stinger/ Electrode Holder with Male Connector (SMAW)
• Pliers / Cutters (FCAW)
• Safety Glasses
• Wire Brush
ESSENTIAL JOB FUNCTIONS:
• Must have knowledge of equipment, work processes, and techniques used for this role including the ability to perform all functions of the position in conformity with applicable regulations and generally observed safety practices.
• Enter and move through manholes to reach and work in internally confined spaces.
• Manipulate and transport loads up to 50 pounds over distances of up to 200 feet approximately 1 to 6 times during each 8 hour shift, occasionally 75 pounds.
• Manipulate and operate all machines and tools essential to the performance of the position of Structural Welder.
• Traverse gangways and scaffolding at varying heights.
• Traverse and negotiate uneven surfaces and uneven heights between dock and vessel.
• Stooping, squatting, twisting, kneeling, lifting, and reaching.
BENEFITS:
A limited benefit plan is available to Hutco, Inc. employees through Essential Staff Care. Available plans include:
• Medical / Prescription
• Dental Coverage
• Vision Coverage
• Short Term Disability Benefits
• Term Life Benefits
• Accidental Death & Dismemberment Benefit
CONTACT HUTCO TODAY!
Apply Online:
www.hutcoinc.com
Office:
8306 Broadway
Houston, Tx. 77061
Send resumes to:
[email protected] George Cumpian 832-444-8125
[email protected] Aleckzander Borg 832-872-0838
Or call us at:
Office - (713) 640-1705
Se habla Español
Hutco, Inc. is an Equal Opportunity Employer (EOE).
#HUTCOSP
More Jobs
Urgent Opening - Fitter/Welder onsite Houston, TX (8 Openings)
Net2Source (N2S) · 35–36 an hour
· 7 hours ago
Stick Welders
Hutco Inc · 20 an hour
MIG Welder
Aerotek · 20–23 an hour
· 22 hours ago
TIG Welder
Aerotek · 20–25 an hour
· 22 hours ago
Base Welder
Powell · 1 day ago
Hiring Pipe Welders
Labor One Staffing
Frequently Asked Questions
Quick answers about Welder Jobs in United States
What is the projected median annual wage for welders in the United States in 2026?
As per the U.S. Bureau of Labor Statistics, the projected median annual wage for welders, cutters, solderers, and brazers in the United States is $52,500, or $25.24 per hour, as of 2026. Entry-level welders start at approximately $38,000 annually, while experienced ones earn up to $68,000. Wages are highest in manufacturing states like Louisiana at $28.50 per hour.
What visa do foreign welders need to work legally in the US in 2026?
As per U.S. Citizenship and Immigration Services, foreign welders typically require an H-2B visa for temporary non-agricultural work, with a fiscal year 2026 cap of 66,000 visas plus up to 64,716 supplemental. Employers must obtain a temporary labor certification from DOL proving no US workers available, valid for up to 12 months. Processing fee is $460 per petition as of 2026.
What are the minimum education and experience requirements for welder jobs in the US?
As per the U.S. Department of Labor, welders need a high school diploma or GED and completion of a 6,000-hour apprenticeship program averaging 2 years. No prior experience is required for entry-level apprenticeships starting at age 18. Vocational training from DOL-registered programs provides the necessary skills in MIG, TIG, and stick welding.
What documents are required to apply for welder apprenticeship programs in the US?
As per the U.S. Department of Labor, applicants need a high school diploma or GED, proof of age 18+, driver's license, Social Security number, and resume listing any metalworking experience. Submit online via Apprenticeship.gov portal with sponsor-specific forms. Background check and drug test are standard, processed within 30 days.
Latest Articles
