Company
Randstad Malaysia
Location
Kuala Lumpur, Federal Territory of Kuala Lumpur
Via
via Randstad Malaysia
Job description
About the Company
Manufacturing
About the Job
Complete finished product packaging and boxing operations in accordance with work order standards and quality control requirements; implement job safety management requirements and control packaging material waste; strictly execute self-inspection, first-piece inspection, and periodic inspection requirements to ensure boxing quality and prevent incorrect packaging, missing packaging, and outflow of defective products; maintain 5S on site at the workplace; ensure production line packaging output meets target standards and that product quality and appearance are compliant; ensure the stable operation of all process steps; comply with workshop management and eliminate slackness; strictly abide by safety operating procedures, standardize operations, and continuously improve production efficiency.
- Strict Rules Compliance: Strictly abide by all company and workshop rules and regulations, and strictly prohibit any safety violations or rough operations.
- PPE & Workwear Requirements: Designated PPE must be worn properly when entering the workshop. Work uniforms must be worn neatly, with collars, cuffs, and hems properly secured/fastened.
- Presence & Station Discipline: Leaving the workstation or going unreachable without prior permission from the foreman or supervisor is strictly prohibited.
- Mobile Phone Usage: Strict prohibition on mobile phone use during work hours. Mobile phones must be switched off or set to silent mode. Playing with phones or holding phones while working is strictly forbidden.
- Equipment Safety Protocols: Do not approach or reach into any rotating parts while equipment is in operation. Maintenance, inspection, debugging, and cleaning may only be performed after the machine is completely stopped.
- Daily Pre-Shift Meetings: Attend daily pre-shift meetings on time and carefully listen to the production plan, quality requirements, safety precautions, and reports on yesterday's issues communicated by the team leader.
- Time Management & Preparation: Make full use of working hours. Accurately and quickly collect raw materials according to the work order, complete pre-production preparations properly, and do not delay without reason.
- Material Verification: Confirm that the production material name, specification/model, batch number, carton label information, etc., are correct according to the work order.
- Packaging Material Inspection: Inspect the appearance of packaging materials for any damage, contamination, or quality defects.
- First-Piece & Sample Inspection: For each batch of semi-finished products, sample submission and first-piece inspection must be performed; mass production can only proceed after passing inspection.
- Quality Control & Defect Prevention: Strictly enforce product quality inspection standards, perform self-inspections of quality for every roll during packaging, and strictly prevent mispacking, missing packaging, or defective items from entering finished product cartons.
- Production Records Verification: Ensure all equipment parameters and production conditions are verified every 2 hours, and fill out production record reports truthfully and accurately without falsification.
- Quality Monitoring & Abnormality Reporting: Continuously monitor product quality during the production process, promptly identify any abnormalities, and report them to the shift leader/person-in-charge.
- Work Order Changeovers: During work order changeovers, thoroughly clean up residual materials and waste from the previous work order to ensure no leftover materials remain, preventing mix-ups before starting the next work order.
- Production Targets & Efficiency: Maintain a consistent work pace, achieve daily production targets, and continuously strive to exceed the production efficiency and output goals set for the line.
- Workstation Cleanliness: Keep the workstation area clean and tidy, and promptly clear waste generated during the production process.
- Shift Cleaning & Handover Inspection: Thoroughly perform a complete cleaning of the workstation before the end of the shift; leaving the station is permitted.
Experience
2 years
Skills
Packaging
Qualifications
High school
Education
College/Pre-University
Manufacturing
About the Job
Complete finished product packaging and boxing operations in accordance with work order standards and quality control requirements; implement job safety management requirements and control packaging material waste; strictly execute self-inspection, first-piece inspection, and periodic inspection requirements to ensure boxing quality and prevent incorrect packaging, missing packaging, and outflow of defective products; maintain 5S on site at the workplace; ensure production line packaging output meets target standards and that product quality and appearance are compliant; ensure the stable operation of all process steps; comply with workshop management and eliminate slackness; strictly abide by safety operating procedures, standardize operations, and continuously improve production efficiency.
- Strict Rules Compliance: Strictly abide by all company and workshop rules and regulations, and strictly prohibit any safety violations or rough operations.
- PPE & Workwear Requirements: Designated PPE must be worn properly when entering the workshop. Work uniforms must be worn neatly, with collars, cuffs, and hems properly secured/fastened.
- Presence & Station Discipline: Leaving the workstation or going unreachable without prior permission from the foreman or supervisor is strictly prohibited.
- Mobile Phone Usage: Strict prohibition on mobile phone use during work hours. Mobile phones must be switched off or set to silent mode. Playing with phones or holding phones while working is strictly forbidden.
- Equipment Safety Protocols: Do not approach or reach into any rotating parts while equipment is in operation. Maintenance, inspection, debugging, and cleaning may only be performed after the machine is completely stopped.
- Daily Pre-Shift Meetings: Attend daily pre-shift meetings on time and carefully listen to the production plan, quality requirements, safety precautions, and reports on yesterday's issues communicated by the team leader.
- Time Management & Preparation: Make full use of working hours. Accurately and quickly collect raw materials according to the work order, complete pre-production preparations properly, and do not delay without reason.
- Material Verification: Confirm that the production material name, specification/model, batch number, carton label information, etc., are correct according to the work order.
- Packaging Material Inspection: Inspect the appearance of packaging materials for any damage, contamination, or quality defects.
- First-Piece & Sample Inspection: For each batch of semi-finished products, sample submission and first-piece inspection must be performed; mass production can only proceed after passing inspection.
- Quality Control & Defect Prevention: Strictly enforce product quality inspection standards, perform self-inspections of quality for every roll during packaging, and strictly prevent mispacking, missing packaging, or defective items from entering finished product cartons.
- Production Records Verification: Ensure all equipment parameters and production conditions are verified every 2 hours, and fill out production record reports truthfully and accurately without falsification.
- Quality Monitoring & Abnormality Reporting: Continuously monitor product quality during the production process, promptly identify any abnormalities, and report them to the shift leader/person-in-charge.
- Work Order Changeovers: During work order changeovers, thoroughly clean up residual materials and waste from the previous work order to ensure no leftover materials remain, preventing mix-ups before starting the next work order.
- Production Targets & Efficiency: Maintain a consistent work pace, achieve daily production targets, and continuously strive to exceed the production efficiency and output goals set for the line.
- Workstation Cleanliness: Keep the workstation area clean and tidy, and promptly clear waste generated during the production process.
- Shift Cleaning & Handover Inspection: Thoroughly perform a complete cleaning of the workstation before the end of the shift; leaving the station is permitted.
Experience
2 years
Skills
Packaging
Qualifications
High school
Education
College/Pre-University
Frequently asked questions
Quick answers about Packing Jobs
Q
What is the minimum wage for packing jobs in Malaysia in 2026?
Under the Minimum Wages Order 2024, which took effect on 1 February 2025, the minimum wage for packers is RM1,700 per month, or RM8.17 per hour for hourly-paid workers. The rate applies to employers with 5 or more employees from 1 February 2025, and to employers with fewer than 5 employees from 1 August 2025. Any packing job offering less than RM1,700 per month for full-time work breaches the Order.
Source: Ministry of Human Resources Malaysia (KESUMA)
Q
How much overtime pay should a factory packer get for working on rest days or public holidays?
Under the Employment Act 1955, overtime is paid at 1.5 times the hourly rate on normal working days, 2 times on rest days, and 3 times on public holidays. The hourly rate is calculated as monthly wage ÷ 26 ÷ 8, so for a RM1,700 wage it is about RM8.17, giving roughly RM12.26 per hour on weekdays, RM16.35 on rest days and RM24.52 on public holidays. Total overtime is capped at 104 hours per month.
Source: Labour Department of Peninsular Malaysia (JTKSM)
Q
How many hours a week can a packing worker be made to work, and how much leave do they get?
The Employment Act 1955, as amended from 1 January 2023, limits ordinary working hours to 45 hours per week. Annual leave is 8 days for under 2 years of service, 12 days for 2 to under 5 years, and 16 days for 5 years or more. Paid sick leave is 14, 18 or 22 days for the same service bands, and up to 60 days if hospitalised.
Source: Labour Department of Peninsular Malaysia (JTKSM)
Q
What EPF, SOCSO and EIS deductions will come out of my packing job salary?
Employees contribute 11% of monthly wages to EPF, and employers contribute 13% for wages of RM5,000 and below. On a RM1,700 salary, that is RM187 deducted for EPF. PERKESO also collects SOCSO and EIS contributions, with EIS at 0.2% from the employee and 0.2% from the employer, and SOCSO employment injury coverage starts from the first day of work.
Source: Employees Provident Fund (KWSP)
