Shop Fitter/ Welder
Houston, United StatesCompany
CB&I Careers
Location
Houston, TX
Job Type
Full-time
Via
CB&I
Apply On
Job Description
Company Overview
CB&I® is the world’s leading designer and builder of storage facilities, tanks and terminals. With more than 60,000 structures completed throughout our 135+ year history, we have the global expertise and strategically-located operations to provide customers world-class storage solutions for even the most complex energy infrastructure projects.
Overview
Welds together metal components of products, as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment. Lays out, Positions, Aligns and fits together Fabricated parts.
Responsibilities
• Lays out, positions, aligns and fits together fabricated parts of structural metal products in shop according to blueprint and layout specifications, preparatory to welding or riveting.
• Plans sequence of operation, applying knowledge of geometry, effects of heat, and allowance for weld shrinkage, machining and thickness of metal.
• Sets up face block, jigs and fixtures.
• Locates and marks centerlines and reference points onto floor or face block and transposes them to work piece, using tape, chains, plumb bob, and squares.
• Moves parts into position, manually or by hoist or crane.
• Removes high spots and cuts bevels, using hand files, portable grinders and cutting torch. Straightens warped or bent parts.
• Positions or tightens braces, jacks, clamps, ropes, or bolt straps or bolt parts in positions for welding or riveting.
• Responsible for observing and complying with all safety and project rules, including wearing required personal safety equipment. Performs other duties and activities as required.
• Interpret engineering drawings and specifications to plan layout, assembly, and welding operations with precision.
• Lay out, position, and secure parts and assemblies using measuring tools such as straightedges, calipers, and rulers.
• Perform tack-welding and full welding on components in flat, vertical, horizontal, and overhead positions, including under pre-heat conditions.
• Cut and shape metal workpieces using powered oxy-fuel hand torch and other shop tools.
• Install and repair fabricated parts into assemblies, ensuring structural integrity and alignment.
• Remove surface imperfections using grinders, scrapers, and other finishing tools to meet quality standards.
• Select appropriate welding equipment and methods based on material properties and job requirements.
• Maintain a clean and safe work environment, including sweeping floors, removing hazards, and organizing tools.
• Manually guides electrode or gun along weld line, maintaining length of arc and speed of movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle.
• Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun.
• Connects cables from welding unit to obtain amperage, voltage, slope, and pulse, as specified by Welding Engineer.
• Starts power supply to produce electric current.
• Strikes arc which generates heat to make and deposit metal from electrode to work piece and join edges of work piece.
• Welds in flat, horizontal, vertical, or overhead positions.
• Examines weld for bead size and other specifications.
• May manually apply filler rod to supply weld metal.
• May clean or degrease weld joint or work piece, using wire brush, portable grinder, or chemical bath.
• May repair broken or cracked parts and fill holes. May prepare broken parts for welding by grooving or scarfing surfaces.
• May chip off excess weld, slag, and spatter, using hand scraper or power chipper. May preheat work piece, using hand torch or heating furnace.
• May position and clamp work pieces together or assemble them in jig or fixture. May tack assemblies together.
• May cut metal plates or structural shapes.
• May be designated according to type of equipment used as Welder, Carbon Arc (welding); Welder, Flux-Cored Arc (welding); Welder, Gas-Metal Arc (welding); Welder, Gas-Tungsten Arc (welding); Welder, Hand, Submerged Arc (welding); Welder, Plasma Arc (welding); Welder, Shielded-Metal Arc (welding).
• May operate other machine shop equipment to prepare components for welding.
• May be required to pass employer performance tests or standard tests to meet certification standards of governmental agencies or professional and technical associations.
• Responsible for observing and complying with all safety and project rules, including wearing required personal safety equipment. Performs other duties and activities as required.
JOB REQUIREMENTS
• Performing only those jobs on which they have been trained and/or authorized.
• Working in accordance with safe job practices and complying with company safety rules
• Using required personal protective equipment
• Reporting unsafe conditions or practices
• Making safety suggestions
• Serving on the safety committee if requested
• Cooperating during investigation of any accidents that occur
• Taking an active part and participating in safety meetings, pre-job safety briefings, task hazard analyses and Job Safety Analyses.
Local Requirements
Physical Demands:
NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%)
Standing
F
Walking
F
Sitting
O
Crouching
F
Bending
F
Balancing
O
Climbing
O
Stooping
O
Crawling
O
Reaching
F
Handling
F
Fingering
F
Lifting (lbs.)
Carrying (lbs.)
Pushing/Pulling (lbs.)
0-10 lbs.
F
0-10 lbs.
F
0-10 lbs.
O
10-20 lbs.
F
10-20 lbs.
F
10-20 lbs.
O
25-50 lbs.
O
25-50 lbs.
O
25-50 lbs.
O
50-100 lbs.
NP
50-100 lbs.
NP
50-100 lbs.
NP
100+ lbs.
NP
100+ lbs.
NP
100+ lbs.
NP
Qualifications
May require a high school diploma or its equivalent and previous years of related experience.
Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
Relies on instructions and pre-established guidelines to perform the functions of the job.
Works under minimum supervision.
Skills and Behaviors
• Adaptability and Agility to learn and contribute in varying and complex environments
• Advanced Self-Awareness and Interpersonal skills
• A consistently developing Business and Technical Acumen coupled with a drive to achieve results
• Computer Skills:
• Communication Skills: Ability to effectively verbally communicate directions from craft supervisors and respond to questions from managers and fellow workers.
• Mathematical skills: Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations
CB&I® is the world’s leading designer and builder of storage facilities, tanks and terminals. With more than 60,000 structures completed throughout our 135+ year history, we have the global expertise and strategically-located operations to provide customers world-class storage solutions for even the most complex energy infrastructure projects.
Overview
Welds together metal components of products, as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment. Lays out, Positions, Aligns and fits together Fabricated parts.
Responsibilities
• Lays out, positions, aligns and fits together fabricated parts of structural metal products in shop according to blueprint and layout specifications, preparatory to welding or riveting.
• Plans sequence of operation, applying knowledge of geometry, effects of heat, and allowance for weld shrinkage, machining and thickness of metal.
• Sets up face block, jigs and fixtures.
• Locates and marks centerlines and reference points onto floor or face block and transposes them to work piece, using tape, chains, plumb bob, and squares.
• Moves parts into position, manually or by hoist or crane.
• Removes high spots and cuts bevels, using hand files, portable grinders and cutting torch. Straightens warped or bent parts.
• Positions or tightens braces, jacks, clamps, ropes, or bolt straps or bolt parts in positions for welding or riveting.
• Responsible for observing and complying with all safety and project rules, including wearing required personal safety equipment. Performs other duties and activities as required.
• Interpret engineering drawings and specifications to plan layout, assembly, and welding operations with precision.
• Lay out, position, and secure parts and assemblies using measuring tools such as straightedges, calipers, and rulers.
• Perform tack-welding and full welding on components in flat, vertical, horizontal, and overhead positions, including under pre-heat conditions.
• Cut and shape metal workpieces using powered oxy-fuel hand torch and other shop tools.
• Install and repair fabricated parts into assemblies, ensuring structural integrity and alignment.
• Remove surface imperfections using grinders, scrapers, and other finishing tools to meet quality standards.
• Select appropriate welding equipment and methods based on material properties and job requirements.
• Maintain a clean and safe work environment, including sweeping floors, removing hazards, and organizing tools.
• Manually guides electrode or gun along weld line, maintaining length of arc and speed of movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle.
• Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun.
• Connects cables from welding unit to obtain amperage, voltage, slope, and pulse, as specified by Welding Engineer.
• Starts power supply to produce electric current.
• Strikes arc which generates heat to make and deposit metal from electrode to work piece and join edges of work piece.
• Welds in flat, horizontal, vertical, or overhead positions.
• Examines weld for bead size and other specifications.
• May manually apply filler rod to supply weld metal.
• May clean or degrease weld joint or work piece, using wire brush, portable grinder, or chemical bath.
• May repair broken or cracked parts and fill holes. May prepare broken parts for welding by grooving or scarfing surfaces.
• May chip off excess weld, slag, and spatter, using hand scraper or power chipper. May preheat work piece, using hand torch or heating furnace.
• May position and clamp work pieces together or assemble them in jig or fixture. May tack assemblies together.
• May cut metal plates or structural shapes.
• May be designated according to type of equipment used as Welder, Carbon Arc (welding); Welder, Flux-Cored Arc (welding); Welder, Gas-Metal Arc (welding); Welder, Gas-Tungsten Arc (welding); Welder, Hand, Submerged Arc (welding); Welder, Plasma Arc (welding); Welder, Shielded-Metal Arc (welding).
• May operate other machine shop equipment to prepare components for welding.
• May be required to pass employer performance tests or standard tests to meet certification standards of governmental agencies or professional and technical associations.
• Responsible for observing and complying with all safety and project rules, including wearing required personal safety equipment. Performs other duties and activities as required.
JOB REQUIREMENTS
• Performing only those jobs on which they have been trained and/or authorized.
• Working in accordance with safe job practices and complying with company safety rules
• Using required personal protective equipment
• Reporting unsafe conditions or practices
• Making safety suggestions
• Serving on the safety committee if requested
• Cooperating during investigation of any accidents that occur
• Taking an active part and participating in safety meetings, pre-job safety briefings, task hazard analyses and Job Safety Analyses.
Local Requirements
Physical Demands:
NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%)
Standing
F
Walking
F
Sitting
O
Crouching
F
Bending
F
Balancing
O
Climbing
O
Stooping
O
Crawling
O
Reaching
F
Handling
F
Fingering
F
Lifting (lbs.)
Carrying (lbs.)
Pushing/Pulling (lbs.)
0-10 lbs.
F
0-10 lbs.
F
0-10 lbs.
O
10-20 lbs.
F
10-20 lbs.
F
10-20 lbs.
O
25-50 lbs.
O
25-50 lbs.
O
25-50 lbs.
O
50-100 lbs.
NP
50-100 lbs.
NP
50-100 lbs.
NP
100+ lbs.
NP
100+ lbs.
NP
100+ lbs.
NP
Qualifications
May require a high school diploma or its equivalent and previous years of related experience.
Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
Relies on instructions and pre-established guidelines to perform the functions of the job.
Works under minimum supervision.
Skills and Behaviors
• Adaptability and Agility to learn and contribute in varying and complex environments
• Advanced Self-Awareness and Interpersonal skills
• A consistently developing Business and Technical Acumen coupled with a drive to achieve results
• Computer Skills:
• Communication Skills: Ability to effectively verbally communicate directions from craft supervisors and respond to questions from managers and fellow workers.
• Mathematical skills: Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations
More Jobs
Urgent Opening - Fitter/Welder onsite Houston, TX (8 Openings)
Net2Source (N2S) · 35–36 an hour
· 7 hours ago
Stick Welders
Hutco Inc · 20 an hour
MIG Welder
Aerotek · 20–23 an hour
· 22 hours ago
TIG Welder
Aerotek · 20–25 an hour
· 22 hours ago
Base Welder
Powell · 1 day ago
Hiring Pipe Welders
Labor One Staffing
Frequently Asked Questions
Quick answers about Welder Jobs in United States
What is the projected median annual wage for welders in the United States in 2026?
As per the U.S. Bureau of Labor Statistics, the projected median annual wage for welders, cutters, solderers, and brazers in the United States is $52,500, or $25.24 per hour, as of 2026. Entry-level welders start at approximately $38,000 annually, while experienced ones earn up to $68,000. Wages are highest in manufacturing states like Louisiana at $28.50 per hour.
What visa do foreign welders need to work legally in the US in 2026?
As per U.S. Citizenship and Immigration Services, foreign welders typically require an H-2B visa for temporary non-agricultural work, with a fiscal year 2026 cap of 66,000 visas plus up to 64,716 supplemental. Employers must obtain a temporary labor certification from DOL proving no US workers available, valid for up to 12 months. Processing fee is $460 per petition as of 2026.
What are the minimum education and experience requirements for welder jobs in the US?
As per the U.S. Department of Labor, welders need a high school diploma or GED and completion of a 6,000-hour apprenticeship program averaging 2 years. No prior experience is required for entry-level apprenticeships starting at age 18. Vocational training from DOL-registered programs provides the necessary skills in MIG, TIG, and stick welding.
What documents are required to apply for welder apprenticeship programs in the US?
As per the U.S. Department of Labor, applicants need a high school diploma or GED, proof of age 18+, driver's license, Social Security number, and resume listing any metalworking experience. Submit online via Apprenticeship.gov portal with sponsor-specific forms. Background check and drug test are standard, processed within 30 days.
Latest Articles
