Company
LETSCORPORATE ENTERPRISE PRIVATE LIMITED
Location
Singapore
Posted
6 days ago
Via
via Trabajo.org
Apply on
Job description
Key Responsibilities:
- Install, inspect, service, and repair refrigeration and air conditioning systems.
- Diagnose mechanical and electrical faults in HVAC/R systems.
- Perform routine maintenance on commercial and residential cooling systems.
- Recharge systems with refrigerant and check for leaks.
- Read and interpret technical drawings, schematics, and manuals.
- Calibrate thermostats and ensure systems operate efficiently.
- Maintain records of repairs, maintenance schedules, and compliance checks.
- Comply with health and safety standards and regulations.
- Recommend system upgrades or replacements when needed.
- Work independently or as part of a team in various settings (residential, commercial, or industrial).
Requirements:
- Diploma or Certificate in Refrigeration and Air Conditioning Engineering or equivalent.
- Proven experience as an HVAC/R technician or engineer.
- Knowledge of refrigeration cycles, electrical systems, and control systems.
- EPA or equivalent certification for handling refrigerants (if applicable).
- Strong problem-solving skills and attention to detail.
- Ability to work in confined spaces or at heights, as required.
- Valid driver’s license (if fieldwork is involved).
- Good communication and customer service skills.
Preferred Qualifications:
- Experience with energy-efficient and smart ACMV and HVAC systems.
- Familiarity with Building Management Systems (BMS).
- Knowledge of local HVAC codes and safety regulations.
- Welding and brazing skills.
Working Conditions:
- Work may involve travel to client sites or facilities.
- May require overtime, weekend, or on-call shifts.
- Work in varying environments, including hot or cold temperatures.
Technical Skills
HVAC System Installation & Repair
- Installing air conditioning, refrigeration, and ventilation systems.
- Diagnosing faults and carrying out repairs.
Refrigeration Cycle Knowledge
- Understanding the thermodynamic cycle (evaporation, compression, condensation, expansion).
Electrical & Electronic Skills
- Wiring systems, reading circuit diagrams.
- Knowledge of control systems and sensors.
Mechanical Aptitude
- Understanding of compressors, condensers, evaporators, and fans.
- Ability to use tools and machinery safely.
System Design & Sizing
- Load calculations for appropriate system selection.
- Ductwork and piping design.
Refrigerant Handling
- Safe handling of refrigerants (e.g., R-410A, R-134a).
- Knowledge of recovery, recycling, and leak detection procedures.
- EPA 608 certification (or equivalent depending on country).
Energy Efficiency & Environmental Compliance
- Knowledge of green technologies (like inverter systems, VRF/VRV systems).
- Awareness of climate regulations and refrigerant phase-outs (e.g., F-Gas regulations).
Computer & Software Proficiency
- Using diagnostic tools and software (e.g., BMS systems, HVAC design tools like AutoCAD, Revit MEP).
Practical Skills:
Blueprint Reading
- Interpreting technical drawings and schematics.
Welding & Brazing
- Joining refrigerant piping and components.
Preventive Maintenance
- Scheduling and executing regular maintenance.
- Keeping detailed service records.
Testing & Calibration
- Using gauges, multimeters, leak detectors, and pressure sensors
- Install, inspect, service, and repair refrigeration and air conditioning systems.
- Diagnose mechanical and electrical faults in HVAC/R systems.
- Perform routine maintenance on commercial and residential cooling systems.
- Recharge systems with refrigerant and check for leaks.
- Read and interpret technical drawings, schematics, and manuals.
- Calibrate thermostats and ensure systems operate efficiently.
- Maintain records of repairs, maintenance schedules, and compliance checks.
- Comply with health and safety standards and regulations.
- Recommend system upgrades or replacements when needed.
- Work independently or as part of a team in various settings (residential, commercial, or industrial).
Requirements:
- Diploma or Certificate in Refrigeration and Air Conditioning Engineering or equivalent.
- Proven experience as an HVAC/R technician or engineer.
- Knowledge of refrigeration cycles, electrical systems, and control systems.
- EPA or equivalent certification for handling refrigerants (if applicable).
- Strong problem-solving skills and attention to detail.
- Ability to work in confined spaces or at heights, as required.
- Valid driver’s license (if fieldwork is involved).
- Good communication and customer service skills.
Preferred Qualifications:
- Experience with energy-efficient and smart ACMV and HVAC systems.
- Familiarity with Building Management Systems (BMS).
- Knowledge of local HVAC codes and safety regulations.
- Welding and brazing skills.
Working Conditions:
- Work may involve travel to client sites or facilities.
- May require overtime, weekend, or on-call shifts.
- Work in varying environments, including hot or cold temperatures.
Technical Skills
HVAC System Installation & Repair
- Installing air conditioning, refrigeration, and ventilation systems.
- Diagnosing faults and carrying out repairs.
Refrigeration Cycle Knowledge
- Understanding the thermodynamic cycle (evaporation, compression, condensation, expansion).
Electrical & Electronic Skills
- Wiring systems, reading circuit diagrams.
- Knowledge of control systems and sensors.
Mechanical Aptitude
- Understanding of compressors, condensers, evaporators, and fans.
- Ability to use tools and machinery safely.
System Design & Sizing
- Load calculations for appropriate system selection.
- Ductwork and piping design.
Refrigerant Handling
- Safe handling of refrigerants (e.g., R-410A, R-134a).
- Knowledge of recovery, recycling, and leak detection procedures.
- EPA 608 certification (or equivalent depending on country).
Energy Efficiency & Environmental Compliance
- Knowledge of green technologies (like inverter systems, VRF/VRV systems).
- Awareness of climate regulations and refrigerant phase-outs (e.g., F-Gas regulations).
Computer & Software Proficiency
- Using diagnostic tools and software (e.g., BMS systems, HVAC design tools like AutoCAD, Revit MEP).
Practical Skills:
Blueprint Reading
- Interpreting technical drawings and schematics.
Welding & Brazing
- Joining refrigerant piping and components.
Preventive Maintenance
- Scheduling and executing regular maintenance.
- Keeping detailed service records.
Testing & Calibration
- Using gauges, multimeters, leak detectors, and pressure sensors
More jobs
PLUMBER GOH SON PLUMBING & RENOVATION $2.8K–$4K a month 10 days ago PLUMBER – Singapore Unify Recruitment Pte. Ltd. $3.3K a month M&E Plumbing Anradus 17 hours ago PLUMBING INSTALLATION AND REPAIR SUPERVISOR SH PLUMBING & JETTING PTE. LTD. Technician (Plumbing / Sanitary Fixtures/Bathroom/Kitchen)- Up to $3500 SEARCH PERSONNEL PRIVATE LIMITED Mechanical, Electrical and Plumbing Coordinator seah kim cheok construction co. (pte) ltd. 1 day agoFrequently asked questions
Quick answers about Plumber Jobs in Singapore
Q
What is the median monthly salary for plumbers in Singapore in 2026?
The median gross monthly income for plumbers (SOC 7122) in Singapore is S$4,200 as of 2026. Entry-level plumbers earn S$3,000 monthly, while experienced ones with 5+ years earn up to S$5,500. Employers must pay at least the prevailing market rate under fair consideration framework.
Source: Ministry of Manpower (MOM) - Occupational Wage Statistics
Q
What work permit do I need as a foreign plumber from Malaysia to work in Singapore?
Foreign plumbers from Malaysia qualify for a Work Permit in the construction sector, with a monthly levy of S$650 for those with 3+ years experience or S$1,050 otherwise as of 2026. Quotas apply at 87% for Malaysians. The employer applies via WP Online, valid up to 2 years.
Source: Ministry of Manpower (MOM)
Q
What qualifications are required to get hired as a plumber in Singapore without prior experience?
A NITEC in Plumbing and Pipefitting or equivalent from ITE, plus completion of 6-month On-the-Job Training, qualifies fresh entrants for plumber roles as of 2026. Local job seekers need to register with NTUC e2i for placement. Foreigners require skills assessment by MOM-approved centers.
Source: Ministry of Manpower (MOM)
Q
What documents are needed to apply for a plumber job work permit in Singapore?
Required documents include passport copy, medical exam report (valid 3 months), employment contract stating S$3,000+ salary, and skills proof for higher levy tier as of 2026. Employer submits via MOM's WP Online portal within 7 days of arrival. Processing takes 3-5 weeks.
Source: Ministry of Manpower (MOM)
