Company
NXP Semiconductors
Location
Kuala Lumpur, Federal Territory of Kuala Lumpur
Job type
Full-time
Posted
23 hours ago
Via
via LinkedIn
Apply on
Job description
The Senior Flip-Chip Front-End Packaging Development Engineer – Die Attach & Underfill is responsible for leading FC-FE process development, optimization, and integration activities for die attach and underfill process. This role requires strong technical capability in process characterization, DOE, troubleshooting, yield improvement, material qualification, and equipment readiness to support packages development and production release. The engineer will work closely with cross-functional teams to ensure robust process performance, manufacturability, reliability, and continuous improvement across flip-chip packaging platforms.
Process Ownership & Optimization
- Take ownership of FC-FE die attach and underfill processes for semiconductor packages, including advanced package platforms.
- Define, develop, optimize, and maintain critical process parameters for die placement, bonding, reflow, underfill dispensing, cure, CSAM, and related process controls.
- Lead design of experiments (DOE) activities to improve process yield, product reliability, void control, fillet quality, underfill flow, curing profile, and CSAM performance.
- Diagnose and resolve complex front-end process defects through systematic analysis and data-driven decision-making.
Advanced Troubleshooting & Yield Improvement
- Drive root cause analysis for yield excursions using structured problem-solving methodologies, including 8D, Fishbone, 5-Why, and FTA.
- Develop and implement corrective and preventive actions to sustain yield improvement and prevent recurrence.
- Monitor yield performance and initiate continuous improvement projects to enhance process capability.
- Analyze inline process data and reliability results to identify potential process risks and improvement opportunities.
Tooling & Equipment Management
- Lead tooling, fixture, and dispense process improvements in collaboration with vendors to support first-time NPI-development requirements.
- Support die attach and underfill, CSAM equipment qualification, calibration, upgrades, and readiness for production deployment.
New Product Leadership
- Lead process development activities for new packages from concept phase through production release.
- Conduct technology research, process characterization, and process window development to support NPI readiness.
- Collaborate with the design engineering team to define and validate Design for Manufacturability (DFM) requirements.
- Prepare and maintain process documentation, including specifications, work instructions, control plans, and related technical records.
Material & Process Integration
- Evaluate and qualify FC-FE-related materials, including die attach materials, flux, underfill, and associated consumables to support process performance, manufacturability, and reliability requirements.
- Work closely with suppliers to address material-related issues, drive improvements, and support qualification activities.
- Assess interactions among die attach process design, underfill material properties, curing conditions, CSAM results, package structure, and reliability performance to ensure robust process integration.
- Establish underfill inspection and acceptance criteria, including CSAM verification for voids, delamination, non-wet, flow coverage, and cure-related defects.
- Experience or familiarity with AI-based simulation tools will be considered an advantage.
Cross-Functional & Leadership Role
- Serve as the technical lead across operations, quality, product engineering, suppliers, and subcontractors to ensure process alignment and performance.
- Mentor junior engineers and technicians in process development, equipment troubleshooting, and structured problem-solving.
- Provide proactive technical support for failure analysis reviews, risk assessments, and cross-functional technical discussions.
Qualifications
Education
- Bachelor’s degree in Mechanical Engineering, Materials Science, Chemical Engineering, or a related discipline.
Experience
- Minimum of five years of experience in semiconductor packaging, with strong exposure to FC-FE die attach, and underfill dispensing processes. Familiarity with the end-to-end flip-chip process flow will be considered an advantage.
- Demonstrated hands-on experience in high-volume manufacturing and fast-paced development environments.
More information about NXP in Malaysia...
Process Ownership & Optimization
- Take ownership of FC-FE die attach and underfill processes for semiconductor packages, including advanced package platforms.
- Define, develop, optimize, and maintain critical process parameters for die placement, bonding, reflow, underfill dispensing, cure, CSAM, and related process controls.
- Lead design of experiments (DOE) activities to improve process yield, product reliability, void control, fillet quality, underfill flow, curing profile, and CSAM performance.
- Diagnose and resolve complex front-end process defects through systematic analysis and data-driven decision-making.
Advanced Troubleshooting & Yield Improvement
- Drive root cause analysis for yield excursions using structured problem-solving methodologies, including 8D, Fishbone, 5-Why, and FTA.
- Develop and implement corrective and preventive actions to sustain yield improvement and prevent recurrence.
- Monitor yield performance and initiate continuous improvement projects to enhance process capability.
- Analyze inline process data and reliability results to identify potential process risks and improvement opportunities.
Tooling & Equipment Management
- Lead tooling, fixture, and dispense process improvements in collaboration with vendors to support first-time NPI-development requirements.
- Support die attach and underfill, CSAM equipment qualification, calibration, upgrades, and readiness for production deployment.
New Product Leadership
- Lead process development activities for new packages from concept phase through production release.
- Conduct technology research, process characterization, and process window development to support NPI readiness.
- Collaborate with the design engineering team to define and validate Design for Manufacturability (DFM) requirements.
- Prepare and maintain process documentation, including specifications, work instructions, control plans, and related technical records.
Material & Process Integration
- Evaluate and qualify FC-FE-related materials, including die attach materials, flux, underfill, and associated consumables to support process performance, manufacturability, and reliability requirements.
- Work closely with suppliers to address material-related issues, drive improvements, and support qualification activities.
- Assess interactions among die attach process design, underfill material properties, curing conditions, CSAM results, package structure, and reliability performance to ensure robust process integration.
- Establish underfill inspection and acceptance criteria, including CSAM verification for voids, delamination, non-wet, flow coverage, and cure-related defects.
- Experience or familiarity with AI-based simulation tools will be considered an advantage.
Cross-Functional & Leadership Role
- Serve as the technical lead across operations, quality, product engineering, suppliers, and subcontractors to ensure process alignment and performance.
- Mentor junior engineers and technicians in process development, equipment troubleshooting, and structured problem-solving.
- Provide proactive technical support for failure analysis reviews, risk assessments, and cross-functional technical discussions.
Qualifications
Education
- Bachelor’s degree in Mechanical Engineering, Materials Science, Chemical Engineering, or a related discipline.
Experience
- Minimum of five years of experience in semiconductor packaging, with strong exposure to FC-FE die attach, and underfill dispensing processes. Familiarity with the end-to-end flip-chip process flow will be considered an advantage.
- Demonstrated hands-on experience in high-volume manufacturing and fast-paced development environments.
More information about NXP in Malaysia...
Frequently asked questions
Quick answers about Driver Jobs
Q
What is the minimum wage for driver jobs in Malaysia in 2026?
Under the Minimum Wages Order 2024 administered by the Ministry of Human Resources, the minimum wage is RM1,700 per month, or RM8.17 per hour. It has applied to employers with 5 or more employees since 1 February 2025 and to employers with fewer than 5 employees since 1 August 2025. Any lorry, van or delivery driver offer below RM1,700/month for full-time work is below the legal minimum.
Source: Ministry of Human Resources Malaysia (KESUMA)
Q
How much overtime pay should a lorry or delivery driver get in Malaysia?
Under the Employment Act 1955, as amended in 2022, normal working hours are capped at 45 hours per week and 8 hours per day. Overtime is paid at 1.5x the hourly rate on normal working days, 2x on rest days, and 3x on public holidays. For a driver on the RM1,700 minimum wage, the hourly rate is RM8.17, so weekday overtime is about RM12.26 per hour. Drivers of goods and passenger vehicles are covered by these overtime rules regardless of wage level.
Source: Labour Department of Peninsular Malaysia (JTKSM)
Q
How many days of annual leave and sick leave do drivers get in Malaysia?
Under the Employment Act 1955, annual leave is 8 days for under 2 years of service, 12 days for 2 to under 5 years, and 16 days for 5 years or more. Paid sick leave is 14, 18 and 22 days respectively for the same service bands, and up to 60 days if hospitalised. Female employees get 98 days of maternity leave, and married male employees get 7 days of paternity leave.
Source: Labour Department of Peninsular Malaysia (JTKSM)
Q
What licence do I need to drive a lorry or heavy goods vehicle in Malaysia?
To drive heavy goods vehicles such as lorries and trailers, you need a Goods Driving Licence (GDL) in the relevant Class E category (E, E1 or E2). It is issued by the Road Transport Department (JPJ) after you complete approved training and pass the tests. A standard Class D car licence alone is not enough for heavy goods vehicles. Employers hiring without a valid GDL risk offences under the Road Transport Act 1987.
Source: Road Transport Department Malaysia (JPJ)
