Advertisement

Cities

George Town Ipoh Johor Bahru Kuala Lumpur Petaling Jaya

Operator (Packing) - 3 months

Operator (Packing) - 3 months
Company
Randstad Malaysia
Location
Kuala Lumpur, Federal Territory of Kuala Lumpur
Via
via Randstad Malaysia
Job description
About the Company
Manufacturing

About the Job
Complete finished product packaging and boxing operations in accordance with work order standards and quality control requirements; implement job safety management requirements and control packaging material waste; strictly execute self-inspection, first-piece inspection, and periodic inspection requirements to ensure boxing quality and prevent incorrect packaging, missing packaging, and outflow of defective products; maintain 5S on site at the workplace; ensure production line packaging output meets target standards and that product quality and appearance are compliant; ensure the stable operation of all process steps; comply with workshop management and eliminate slackness; strictly abide by safety operating procedures, standardize operations, and continuously improve production efficiency.

- Strict Rules Compliance: Strictly abide by all company and workshop rules and regulations, and strictly prohibit any safety violations or rough operations.
- PPE & Workwear Requirements: Designated PPE must be worn properly when entering the workshop. Work uniforms must be worn neatly, with collars, cuffs, and hems properly secured/fastened.
- Presence & Station Discipline: Leaving the workstation or going unreachable without prior permission from the foreman or supervisor is strictly prohibited.
- Mobile Phone Usage: Strict prohibition on mobile phone use during work hours. Mobile phones must be switched off or set to silent mode. Playing with phones or holding phones while working is strictly forbidden.
- Equipment Safety Protocols: Do not approach or reach into any rotating parts while equipment is in operation. Maintenance, inspection, debugging, and cleaning may only be performed after the machine is completely stopped.
- Daily Pre-Shift Meetings: Attend daily pre-shift meetings on time and carefully listen to the production plan, quality requirements, safety precautions, and reports on yesterday's issues communicated by the team leader.
- Time Management & Preparation: Make full use of working hours. Accurately and quickly collect raw materials according to the work order, complete pre-production preparations properly, and do not delay without reason.
- Material Verification: Confirm that the production material name, specification/model, batch number, carton label information, etc., are correct according to the work order.
- Packaging Material Inspection: Inspect the appearance of packaging materials for any damage, contamination, or quality defects.
- First-Piece & Sample Inspection: For each batch of semi-finished products, sample submission and first-piece inspection must be performed; mass production can only proceed after passing inspection.
- Quality Control & Defect Prevention: Strictly enforce product quality inspection standards, perform self-inspections of quality for every roll during packaging, and strictly prevent mispacking, missing packaging, or defective items from entering finished product cartons.
- Production Records Verification: Ensure all equipment parameters and production conditions are verified every 2 hours, and fill out production record reports truthfully and accurately without falsification.
- Quality Monitoring & Abnormality Reporting: Continuously monitor product quality during the production process, promptly identify any abnormalities, and report them to the shift leader/person-in-charge.
- Work Order Changeovers: During work order changeovers, thoroughly clean up residual materials and waste from the previous work order to ensure no leftover materials remain, preventing mix-ups before starting the next work order.
- Production Targets & Efficiency: Maintain a consistent work pace, achieve daily production targets, and continuously strive to exceed the production efficiency and output goals set for the line.
- Workstation Cleanliness: Keep the workstation area clean and tidy, and promptly clear waste generated during the production process.
- Shift Cleaning & Handover Inspection: Thoroughly perform a complete cleaning of the workstation before the end of the shift; leaving the station is permitted.

Experience
2 years

Skills
Packaging

Qualifications
High school

Education
College/Pre-University

Frequently asked questions

Quick answers about Driver Jobs

Q
What is the minimum wage for driver jobs in Malaysia in 2026?
Under the Minimum Wages Order 2024 administered by the Ministry of Human Resources, the minimum wage is RM1,700 per month, or RM8.17 per hour. It has applied to employers with 5 or more employees since 1 February 2025 and to employers with fewer than 5 employees since 1 August 2025. Any lorry, van or delivery driver offer below RM1,700/month for full-time work is below the legal minimum.
Source: Ministry of Human Resources Malaysia (KESUMA)
Q
How much overtime pay should a lorry or delivery driver get in Malaysia?
Under the Employment Act 1955, as amended in 2022, normal working hours are capped at 45 hours per week and 8 hours per day. Overtime is paid at 1.5x the hourly rate on normal working days, 2x on rest days, and 3x on public holidays. For a driver on the RM1,700 minimum wage, the hourly rate is RM8.17, so weekday overtime is about RM12.26 per hour. Drivers of goods and passenger vehicles are covered by these overtime rules regardless of wage level.
Source: Labour Department of Peninsular Malaysia (JTKSM)
Q
How many days of annual leave and sick leave do drivers get in Malaysia?
Under the Employment Act 1955, annual leave is 8 days for under 2 years of service, 12 days for 2 to under 5 years, and 16 days for 5 years or more. Paid sick leave is 14, 18 and 22 days respectively for the same service bands, and up to 60 days if hospitalised. Female employees get 98 days of maternity leave, and married male employees get 7 days of paternity leave.
Source: Labour Department of Peninsular Malaysia (JTKSM)
Q
What licence do I need to drive a lorry or heavy goods vehicle in Malaysia?
To drive heavy goods vehicles such as lorries and trailers, you need a Goods Driving Licence (GDL) in the relevant Class E category (E, E1 or E2). It is issued by the Road Transport Department (JPJ) after you complete approved training and pass the tests. A standard Class D car licence alone is not enough for heavy goods vehicles. Employers hiring without a valid GDL risk offences under the Road Transport Act 1987.
Source: Road Transport Department Malaysia (JPJ)